webleads-tracker

Technology Partners - Meters/Sensors

GMI Databox - Radio monitoring cables

0 1 1 1 1 1 1 1 1 1 1 Rating 0.00 (0 Votes)

The Wireless cable system blocks and counters "Power Packet" allows monitoring of the power supply and the environment of a datacenter (cabinets, PDU and equipment) or an industrial plant. Through its flexible and scalable architecture, detailed power measurements, temperature, humidity and pressure information easily captured and collected on monitoring points and reported toward a central collection manager. The system provides a power monitoring of single phase, three phase and DC. It is suitable to small sites, as well as large multi-site operations centers.

Energy Meter - Electrical - Power analyser

0 1 1 1 1 1 1 1 1 1 1 Rating 0.00 (0 Votes)

Energy meter/analyser WM30 or WM40
Communication protocols available: RS485, Ethernet, BACnet IP, BACnet MS / TP, Ethernet / IP

EM21-72 is an energy meter.

EM24 DIN is an analyzer to measure the consumption of gas, hot water, cold water and heating.

DTFX-E Ultrasonic - calorific - Energy Meter

0 1 1 1 1 1 1 1 1 1 1 Rating 0.00 (0 Votes)

DTFX-E Ultrasonic energy meter allows you to check your real time energy consumption thanks to its ultrasonic calorific metering technology which calculate energy usage from flow and temperature measurements across heating and cooling equipment and zones. Equip your pipes from 0.5” to 120” (DN12 to DN3048). In place version (DTFX-E) and portable version (DXN-E) available.

Accuracy: +/- 1% of reading.

PDU-IP - Electrical - Intelligents PDU

0 1 1 1 1 1 1 1 1 1 1 Rating 0.00 (0 Votes)

Under the brand PDU IP are proposed solutions for the distribution, control, measurement and supervision of electric power in single or three phases. These solutions are adapted to the needs and requirements of technical rooms and datacenter.

Ultrasonic flowmeter DTFX from BADGER METER

0 1 1 1 1 1 1 1 1 1 1 Rating 0.00 (0 Votes)

Ultrasonic flowmeters DTFX from BADGER METER permits real time checking of your flowrates thanks to its ultrasonic transit time metering technology. Equip your pipes from 0.5” to 120” (DN12 to DN3048). In place version (DTFX) and portable version (DXN) available.

Accuracy: +/- 1% of reading!

ENERGY36 - Electrical - Multi-lines electric meter

4 1 1 1 1 1 1 1 1 1 1 Rating 4.00 (1 Vote)

The meter ENERGY36 is designed for the multi-lines electric counting. It measures and analyzes simultaneously up to 36 lines. The data available due to its network analyser functions (rating, current, voltage, active energy, reactive,THD) allows to a deep analysis of the electric data.
It perfectly fits to the project of energy counting and efficiency.